HUIZHOU, CHINA  ·  ESTABLISHED 1993

Glass is how a building is judged.

One-stop deep processing for architectural glass — tempered, heat-soaked, hot-bent, laminated, insulated and digitally printed, from a single plant in Guangdong.

ISO 9001  ·  ISO 14001  ·  ISO 45001  ·  IGCC / IGMA  ·  BS EN 12150

Curved glass curtain wall of a contemporary building seen from below, mullion grid and sky reflections

01 — CAPABILITIES

Six processes under one roof.

Nothing is subcontracted. Cutting, grinding, tempering, bending, lamination, printing and insulating happen on one industrial floor in Huizhou — which is why an 8-metre unit arrives as one accountable delivery.

  1. 01

    Fully Tempered

    4 – 25 mm · heat-soak tested

    Surface compression up to 120 MPa. It breaks into blunt granules, so it fails safe.

  2. 02

    Heat Strengthened

    4 – 12 mm · slower quench

    Half the strength of tempered, but flatness is held where visual distortion is not tolerated.

  3. 03

    Hot-Bent & Curved

    radius from 600 mm

    Sag-bent on bespoke moulds, then quenched — single units up to 3300 × 8000 mm.

  4. 04

    Laminated

    PVB / SGP · up to 8 m

    SGP brings five times the tear strength of PVB and stays structural after breakage.

  5. 05

    Insulated Glass

    argon · warm-edge spacer

    Double and triple units combining Low-E, ceramic frit or laminated build-ups. U-value to 1.1 W/m²K.

  6. 06

    Fritted & Printed

    3 ceramic print lines

    Full-colour imagery fired into the glass at 700°C — permanent and UV-stable, never a film.

02 — THE PLANT

Capacity you can schedule against.

JIMING ENERGY-SAVING INDUSTRIAL PARK
ZHONGKAI HIGH-TECH ZONE, HUIZHOU
GUANGDONG 516035, CHINA

30+ YEARS CONTINUOUS

One site, from a 20 m² glass shop in 1993.

8,000 MM · LONGEST UNIT

3300 mm wide, laminated, bent or insulated.

3 TEMPERING LINES

Two flat furnaces and one curved furnace.

6 CERTIFICATIONS

Management systems, impact and surface stress.

CERTIFIED & TESTED

ISO 9001 Quality  —  ISO 14001 Environmental  —  ISO 45001 Health & Safety  —  IGCC / IGMA Insulated Glass  —  BS EN 12600 Impact  —  ASTM C1279 Surface Stress  —  BS EN 14179 Heat Soak  —  National Green Material

03 — BUILDING-INTEGRATED PHOTOVOLTAICS

The envelope becomes the power plant.

CdTe thin-film laminated inside architectural glass. The same panel that shades the atrium generates its electricity — no added structure, no visible racking, no compromise on the drawing.

Large dark CdTe thin-film photovoltaic glass roof array on a modern building at dusk

LAMINATE BUILD-UP  ·  CdTe THIN FILM

Ten-year product warranty, twenty-five-year performance warranty. Semi-transparent, patterned and colour-matched variants share the same build-up.

Nominal power
33 – 105 Wp
Module size
1200 × 600 mm
Light transmission
10 – 50 %
Configurations
2-layer · 3-layer · + IGU
Warranty
10 yr / 25 yr

04 — APPLICATIONS

Specified by elevation.

Roof, canopy, façade, spandrel — the same plant cuts the same laminate to whatever the elevation demands. One supplier, one tolerance, one delivery date.

Close-up of digitally printed and ceramic fritted glass façade panels with a gradient dot pattern
  • 01

    Roof top

    Pitched and flat, replacing tile and membrane

  • 02

    Skylight & canopy

    Overhead glazing, laminated safety build-up

  • 03

    Vertical façade

    Unitised or stick, up to 8 m per pane

  • 04

    Spandrels

    Opaque or translucent bands between vision glass

  • 05

    Balustrades

    Structural laminated, SGP where loads demand

  • 06

    Sunrooms & transit

    Bus shelters, park canopies, solar carports

  • 07

    Interiors

    Mirrors, switchable, LED and fabric-laminated glass

05 — NEXT STEP

Send us a drawing.

A DWG, a PDF elevation, or a photograph of the opening is enough. We come back with a build-up, a tolerance summary and a production slot.

info@nexilglass.com

+86 138 2433 0366  ·  GARY LIU

Unit 317A, Tiegang Building, Xixiang Sub-district,
Bao'an District, Shenzhen 518000, China